Epoxy Cast Resin Transformer Tap Range ±2.5%, ±5% Frequency 50hz, 60hz Impedance Voltage 4-8% High Voltage Connection

We manufacture, export and supply Epoxy Cast Resin Transformers in various specifications. The Epoxy Cast Resin Transformers are designed to be Fire resistant, Maintenance Free and Environmentally Safe. Besides, the Epoxy Cast Resin Transformers generate low noise and are very cost-efficient. Made using advanced technology, the Epoxy Cast Resin Transformers are resistant to failures, thus serve as dependable power supply systems.

 

Characteristics
Fire resistant : Cast Resin transformers have an inherently safe characteristic of self fire-extinguishing and fire resistance. So there would be no fear of spread of fire even if a fire took place in nearby equipment.


The transformers can be used indoors without fear of fire, and it is not necessary to provide additional measures for safety.

• Ignited for 2 minutes on the surface of cast coil with acetylene torch.
• As the torch was removed from the surface of burning resin.
• The flame extinguished by itself after 15 seconds.

Maintenance Free : Maintenance is almost completely eliminated. No checking of liquid level and no yearly dielectric test for moisture absorption is required. Due to the smooth coil surfaces, heavy dirt and dust build up is eliminated even under the worst circumstances. The recommended routine maintenance is an occasional visual or Infra-Red thermal inspection.


Environmentally Safe : Power-Cast transformers will not emit oil or toxic gases into the atmosphere. Therefore, they do not pollute the environment and are recommended strongly as a replacement for askarel filled (PCB) transformers. PCB is poisonous, chemically aggressive and can discharge dangerous gases at elevated temperatures.


Low Noise : The encapsulation of the core in a special resin and the design of the clamping mechanism have provided an appreciable noise reduction. Noise is also reduced due to the sound suppressing effect of the elaborate core cutting and the coil support elastic structure.


Cost Saving : If the advantage of Power - Cast transformers is taken into consideration at the planning stage, the overall costs of a power supply system can often be considerably reduced. They are sufficiently compact for convenient installation in a building where space is generally limited and have much smaller power loss than oil immersed and dry-type transformers. Total costs are lower even though cast resin transformers may be more expensive than other transformers. Cost savings add low maintenance and longer operating life in all conditions.


Fewer Failures : Standard Insurance Company studies have shown failure rates in cast coil transformers to be less than 5% that of standard dry type transformers in some applications.

Specifications
Power-Cast transformers are available with specification as follows :

Rated Voltage	HV coil : Up to 36KV LV coil : 0.48-4.16 KV *Power-Cast transformers with multiple high voltage connections can also be supplied.
Tap Range	Standard : ±2.5%, ±5% * Other ratings are available by arrangement.
Power Capacity	Single phase : 20 - 2,000 KVA Three phase : 50 - 10,000 KVA Frequency : 50Hz, 60Hz Typical % impedance voltage : 4-8%.
Connections	HV coil : Delta LV coil : Wye with neutral point * Other connections are available to meet requirements.