Share on
AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution
20000-100000 Kilogram
$1.2Product information
High-quality AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution supplied by Lawana and Sons Supplies. Bulk wholesale pricing is $1.2 per Kilogram with a minimum order of 20,000 Kilogram. Inquiry for latest prices.
Melting Point:
-60°c
Relative Density:
0.9 G/ml At 25°c
Vapour Density:
1.21 – (air = 1.0)
Ph:
11.7 At 20°c
Lower Flammability Limit:
16% (v)
Upper Flammability Limit:
27% (v)
Boiling Point:
27°c At 1.013 Hpa
Molecular Weight:
35.05 G/mol
2 Inquiries
Specifications
Melting Point:
-60°c
Relative Density:
0.9 G/ml At 25°c
Vapour Density:
1.21 – (air = 1.0)
Ph:
11.7 At 20°c
Lower Flammability Limit:
16% (v)
Upper Flammability Limit:
27% (v)
Boiling Point:
27°c At 1.013 Hpa
Molecular Weight:
35.05 G/mol
Weight (Kg):
35.05 g/mol
Vapour Pressure:
837 Hpa At 20°c
Handling Precautions:
Always Open Containers Slowly To Allow Any Excess Pressure To Vent. Avoid Contact With Skin And Eyes. Avoid Inhalation Of Vapour Or Mist.
Type:
Ammonia Solution 25%
Chemical Name:
Ammonia Solution 25%
Chemical Code:
Bulk-a
Recommended Protective Gloves:
Butyl Rubber (0.3 Mm Thickness, 480 Min Break Through Time, Butoject®) For Full Contact; Nitrile Rubber (0.11 Mm Thickness, 240 Min Break Through Time, Dermatril®) For Splash Contact
Trade Term:
CIF
Appearance:
Colourless, Pungent Gas Or White Liquid
Body Protection:
Complete Suit Protecting Against Chemicals. Type Must Be Selected Based On Concentration And Amount Of Dangerous Substance At The Specific Workplace
Incompatible Materials:
Copper, Iron, Zinc
Signal Word:
Danger
First Aid Swallowed:
Do Not Induce Vomiting. Never Give Anything By Mouth To An Unconscious Person. Rinse Mouth With Water. Consult A Physician.
Bioaccumulative Potential:
Does Not Bioaccumulate
Port Of Loading:
Durban
Hazard Statements:
H302 – Harmful If Swallowed. H314 – Causes Severe Skin Burns And Eye Damage. H335 – May Cause Respiratory Irritation. H400 – Very Toxic To Aquatic Life.
Exposure Controls:
Handle In Accordance With Good Industrial Hygiene And Safety Practice. Wash Hands Before Breaks And At The End Of Workday.
Skin Protection:
Handle With Gloves. Gloves Must Be Inspected Prior To Use. Use Proper Glove Removal Technique. Dispose Of Contaminated Gloves After Use. Gloves Must Satisfy Eu Directive 89/686/eec And En 374 Standard
Chemical Formula:
H₅no
Carcinogenicity:
Iarc: No Component Of This Product Present At Levels Greater Than Or Equal To 0.1% Is Identified As Probable, Possible Or Confirmed Human Carcinogen By Iarc.
First Aid Inhaled:
If Breathed In, Move Person Into Fresh Air. If Not Breathing, Give Artificial Respiration. Consult A Physician.
Ecological Toxicity:
Lc50 – Daphnia Magna (water Flea) – 25.4 Mg/l – 48 H
Acute Toxicity:
Ld50 Oral – Rat – 350 Mg/kg
Hazardous Decomposition Products:
Nitrogen Oxides (nox)
Skin Corrosion:
No Data Available
Flash Point:
No Data Available
Eye Irritation:
No Data Available
Disposal Method:
Offer Surplus And Non-recyclable Solutions To A Licensed Disposal Company. Dispose Of Contaminated Packaging As Unused Product.
Precautionary Statements:
P273 – Avoid Release To The Environment. P280 – Wear Protective Gloves/protective Clothing/eye Protection/face Protection. P303 + P361 + P353 – If On Skin (or Hair): Take Off Immediately All Contaminated Clothing. Rinse Skin With Water/shower. P304 + P340 + P310 – If Inhaled: Remove Person To Fresh Air And Keep Comfortable For Breathing. Immediately Call A Poison Center/doctor. P305 + P351 + P338 – If In Eyes: Rinse Cautiously With Water For Several Minutes. Remove Contact Lenses, If Present And Easy To Do. Continue Rinsing. P391 – Collect Spillage.
First Aid Eye Contact:
Rinse Thoroughly With Plenty Of Water For At Least 15 Minutes And Consult A Physician.
Storage Conditions:
Store In Cool Place. Keep Container Tightly Closed In A Dry And Well-ventilated Place. Containers Which Are Opened Must Be Carefully Resealed And Kept Upright To Prevent Leakage. May Develop Pressure. Refrigerate Before Opening.
Payment Term:
T/T
First Aid Skin Contact:
Take Off Contaminated Clothing And Shoes Immediately. Wash Off With Soap And Plenty Of Water. Consult A Physician.
Grade:
Technical
Chemical Grade:
Technical
Pbt Vpvb Assessment:
This Substance/mixture Contains No Components Considered To Be Either Persistent, Bio-accumulative And Toxic (pbt), Or Very Persistent And Very Bio-accumulative (vpvb) At Levels Of 0.1% Or Higher.
Eye Protection:
Tightly Fitting Safety Goggles. Faceshield (8-inch Minimum). Equipment Tested And Approved Under Niosh (us) Or En 166 (eu) Standards
Toxicity To Aquatic Life:
Very Toxic To Aquatic Life
Respiratory Protection:
Where Risk Assessment Shows Air-purifying Respirators Are Appropriate, Use A Full-face Respirator With Multipurpose Combination (us) Or Type Axbek (en 14387) Respirator Cartridges As A Backup. If The Respirator Is The Sole Means Of Protection, Use A Full-face Supplied Air Respirator. Use Respirators And Components Tested And Approved Under Niosh (us) Or Cen (eu) Standards
Lachrymator:
Yes
Photosensitizer:
Yes
Business Details
Country:
South Africa
Business Types:
Agent/Representative, Exporter/Wholesaler, Food manufacturing, Service Provider
Main Products:
Year Established:
Not specified
Annual Revenue Amount:
Annual revenue of USD 10M~50M
Numbers Of Employees:
11-50 employees
Preferred Payment Term:
T/T
Preferred Trade Term:
CIF
Port Of Loading:
Durban
Certificates:
CIPC
Product descriptions from the supplier
Description
Ammonia Solution 25% – Identification of Product
Chemical Code: BULK-A
Chemical Name: Ammonia Solution 25%
Chemical Grade: Technical
Chemical Formula: H₅NO
Chemical Weight: 35.05 g/mol
CAS No:
Chemical Synonyms: Ammonia Aqueous Ammonia Water
Ammonia Solution 25% – Hazards Identification
REACH No: No Data Available
Signal Word: Danger
Supplemental Hazard Information:
Additional Hazard Information: This substance/mixture contains no components considered to be either persistent, bio-accumulative and toxic (PBT), or very persistent and very bio-accumulative (vPvB) at levels of 0.1% or higher. Lachrymator. Photosensitizer.
Ammonia Solution 25% – Hazards statements
H302 – Harmful if swallowed.
H314 – Causes severe skin burns and eye damage.
H335 – May cause respiratory irritation.
H400 – Very toxic to aquatic life.
Ammonia Solution 25% – Precautionary statements
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P303 + P361 + P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 + P310 – If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a Poison center/doctor.
P305 + P351 + P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P391 – Collect spillage.
Ammonia Solution 25% – Composition of Chemical
Chemical Formula: H₅NO
EC No 1272/2008: No Data Available
First Aid Measures
General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance.
If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If: Skin Contact: Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.
If: Eye Contac: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If: Swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Important Symptoms: The most important known symptoms and effects are described in the labelling section.
Immediate Medical Attention: No Data Available
Firefighting Measures
Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or Carbon Dioxide.
Hazards Arising: No Data Available
Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Info for Firefighting: No Data Available
Accidental Release Measures
Personal Precautions: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Method for Containment: Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
Handling and Storage
Personal Precautions: Always open containers slowly to allow any excess pressure to vent. Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Environmental Precautions: Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. May develop pressure. Refrigerate before opening. Handle and open container with care.
Exposure Controls | Personal Protection
Derived No Effect Level (DNEL)
Workers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Consumers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Predicted No Effect Concentration (PNEC)
No Data Available
Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/Face Protection: Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).
Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Full contact
Material: Butyl rubber
Minimum layer thickness: 0,3 mm
Break through time: 480 min.
Material tested: Butoject®
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 240 min.
Material tested: Dermatril®
Data source: KCL GmbH, D-36124, Test method: EN 374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection: Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Ammonia Solution 25% – Physical and Chemical Properties
Appearance: Colourless, pungent gas or White liquid
Odour: No Data Available
Odour Threshold: No Data Available
pH: 11.7 at 20°C
Melting Point: – 60°C
Boiling Point: 27°C at 1.013 hPa
Flash Point: No Data Available
Evaporation: No Data Available
Flammability: No Data Available
Upper/Lower Flammability or Explosive Limits: Upper explosion limit: 27% (V)
Lower explosion limit: 16% (V)
Vapour pressure: 837 hPa at 20°C
Vapour density: 1.21 – (Air = 1.0)
Relative density: 0.9 g/mL at 25°C
Water solubility: No Data Available
Partition Coefficien: No Data Available
Auto-ignition Temperature: No Data Available
Decomposition Temperature: No Data Available
Viscosity: No Data Available
Explosive properties: No Data Available
Oxidizing properties: No Data Available
Other Safety Info: Relative vapour density 1.21 – (Air = 1.0)
Stability and Reactivity
Reactivity: No Data Available
Chemical Stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No Data Available
Conditions to Avoid: No Data Available
Incompatible Materials: Copper, Iron, Zinc
Hazardous Decomposition Products: Hazardous decomposition products formed under fire conditions – Nitrogen Oxides (NOx)
Other decomposition products – No Data Available
Toxicological Information
Acute Toxicity: LD50 Oral – Rat – 350 mg/kg
Remarks: Gastrointestinal: Other changes
Liver: Other changes
Kidney, Ureter, Bladder: Other changes
Skin Corrosion/Irritation: No Data Available
Serious Eye damage | Eye Irritation: No Data Available
Cell Mutagenicity: No Data Available
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: No Data Available
Specific Target Organ Toxicity – Single Exposure: No Data Available
Specific Target Organ Toxicity – Repeated Exposure: No Data Available
Aspiration Hazard: No Data Available
Ecological Information
Ecological Toxicity: Toxicity to daphnia and other aquatic invertebrates: LC50 – Daphnia magna (Water flea) – 25.4 mg/l – 48 h
Ecological Persistence and degradability: No Data Available
Bioaccumulative Potential: Does not bioaccumulate
Mobility in Soil: No Data Available
Results of PBT and vPvB Assessment: This substance/mixture contains no components considered to be either persistent, bio-accumulative and toxic (PBT), or very persistent and very bio-accumulative (vPvB) at levels of 0.1% or higher.
Other Adverse Effect: Very toxic to aquatic life
Disposal Considerations
Waste Treatment Methods: Product:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging:
Dispose of as unused product.
User Reviews
Write a review
File a complaint
Supplier Review
Summary by Vivian
TRUST STARS
5.0/5
0 Reviews
Lawana and Sons Supplies is a South African company that operates as a supplier, exporter, trader, and wholesaler/distributor of various products. Established in 2019, the company is known for sourcing 100% naturally sourced products from the finest outlets, ensuring no banned chemicals are involved. Their diverse product range includes agricultural products, sea food, and frozen foods. They offer an extensive array of items such as energy drinks, baby milk, spices, cooking oils, and various food products like rice, sugar, and canned goods. They also supply raw materials like plastic granules and minerals like copper ores. The company aims to provide top-grade products in the global market, adhering to international industry norms.
Company Verification
4/4
Profile Completeness
78%
Avg. Product Score
2.7/5
Engagement
516 quotes, 151 inquiries in last 7 days
Responsiveness
0%
Certification
CIPC
Related searches
Frequently Asked Questions (FAQs)
How can I buy & import Cleaning Systems from South Africa?
You can contact verified South Africa supplier Lawana and Sons Supplies through platforms like Freshdi.com to purchase AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution. For direct inquiries, please contact Mr. David , the company’s representative. The supplier has a 5.0-star rating on Freshdi and has verified work email business documents phone number and account email. You’ll receive product details, pricing, and shipping terms directly from supplier.
What are the payments and trade terms for AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution?
For AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution, Lawana and Sons Supplies accepts T/T as the preferred payment method, the trade term is CIF, and shipments are typically arranged from port Durban, ensuring secure and timely international delivery.
What is the current price of AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution?
The supplier Lawana and Sons Supplies offers AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution at $1.2 per Kg.
What are the specifications of AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution from South Africa?
AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution is sourced from South Africa and meets international export standards. Key specifications include: Lower Flammability Limit: 16% (v), Recommended Protective Gloves: Butyl Rubber (0.3 Mm Thickness, 480 Min Break Through Time, Butoject®) For Full Contact; Nitrile Rubber (0.11 Mm Thickness, 240 Min Break Through Time, Dermatril®) For Splash Contact, Carcinogenicity: Iarc: No Component Of This Product Present At Levels Greater Than Or Equal To 0.1% Is Identified As Probable, Possible Or Confirmed Human Carcinogen By Iarc., First Aid Inhaled: If Breathed In, Move Person Into Fresh Air. If Not Breathing, Give Artificial Respiration. Consult A Physician., First Aid Skin Contact: Take Off Contaminated Clothing And Shoes Immediately. Wash Off With Soap And Plenty Of Water. Consult A Physician., Chemical Grade: Technical, Trade Term: CIF, Payment Term: T/T
You are viewing details for AMMONIA SOLUTION 25% Grade Technical Weight (kg) 35.05 g/mol Type Ammonia Solution. The information provided here is either posted directly by the supplier, who is responsible for its accuracy, or collected by Freshdi AI from publicly available sources. Freshdi strives to make product information as useful and reliable as possible, but we do not guarantee complete accuracy. If you notice any incorrect or misleading details, please use the Report Product option so our team can review and address it quickly.
$1.2
/ Kilogram
Min. order: 20000 Kilogram
