32 results for “Cold Water Chillers Buying Leads, Buyers & Importers”

We are looking for these products: 1) Required generator sizes (same manufacturer) Unit 1 (Single phase): 7 to 8 kilovolt-ampere rated output 230 volt, 50 hertz, single phase Silent canopy Unit 2 (Three phase): 15 to 20 kilovolt-ampere rated output (18 preferred) 400 volt, 50 hertz, three phase Silent canopy Both units must be supplied by the same factory and preferably the same platform family. 2) Full autonomous start requirement (non-negotiable) Both units must start and stop automatically with: Two-wire dry contact start input terminals for automatic transfer switching No key fob remote start as the primary method Designed for unattended standby operation 3) Controller input and output signals (non-negotiable) Controller must provide at minimum: Start input Running status output Alarm or fault output Fault log preferred 4) Standby cold-start logic (non-negotiable) Automatic glow plug and preheat control Reliable cold start without manual intervention 5) Power quality and step-load performance (non-negotiable) Stable voltage and frequency suitable for inverter and battery charger loads Must tolerate step-load without stalling or unstable speed hunting 6) Noise target (non-negotiable) 70 decibels or less at 7 metres at 50 percent load Must be silent canopy type 7) Fuel system requirement (non-negotiable) Fuel filtration including water separator Serviceable filterwhile in field use - Trade term: EXW (factory) first, later FOB. - Payment term: sample order by T/T 100%. Production: 30% deposit, 70% before shipment (negotiable for larger orders). - Quantity: 1–2 samples first, then 20–50 units per order, scaling to 100+ units. Destination port: Brisbane, Australia. - Trade terms are irrelevant if the offered products do not meet the required specifications. Petrol generators EFI is the required hard technical gate. Carburettor and choke systems are inherently unreliable after standby periods and are therefore not acceptable for unattended operation. This requirement is clearly stated in the petrol RFQ: EFI is mandatory, unless the manufacturer can provide documented, factory-proven evidence of a system designed and validated for reliable unattended starting. Diesel generators Proper glow plug and preheat logic is the required hardware and control requirement. “Electric start” alone is not sufficient if the controller does not execute temperature-based preheat, start retry logic, and fail-to-start alarms. These requirements are explicitly defined in the diesel RFQ and the acceptance protocol.

Closed die forgings, Open die forgings, Seamless rolled rings, Slewing bearing, Centrifugal casting tubes, rings, shells, sleeves, spool, Industrial Furnace rolls and castings, Radiant Casting tubes made from Brass, Copper, Bronze, Stainless steel, Corrosion resistant, High-temp alloy grade centrifugal cast tubes, Corrosion-resistant alloy centrifugal casting tubes, Centrifugal casting sleeve, Carbon steel grade centrifugal cast spool, Carbon steel centrifugal casting bushing, Centrifugal cylinder sleeves and centrifugally casting spools in Aluminum foil industries, the Copper alloy centrifugally casting tubes, the bronze alloy centrifugally casting tubes, the Copper alloy casting bushings, the bronze alloy casting sleeve, the copper alloy centrifugally casting cylindrical components, aluminum-nickel bronze casting tubes, rings, bars, Alloy cast trays, basket, grids. Gas Atomization stainless steel powders and water Atomization stainless steel powder, 430L stainless steel powder, 304 & 304L stainless steel powders, 316 & 316L stainless steel powders for thermal spray metal powders and cold spray metal powders. Sweepolet, Weldolet, Threadolet, Sockolet, Elbolet, Tee, Concentric Reducer, Eccentric Reducer, Pipeline Fittings, 45° Long Radius Elbow, ASME B16.9, ASTM A403 WP316/316L, 90° Long Radius Elbow, ASME B16.9, ASTM A403 WP316/316L, Reducing Tee, ASME B16.9, ASTM A403 WP316/316L, Concentric Reducer, ASME B16.9, ASTM A403 WP316/316L, Reducing Tee, ASME B16.9, ASTM A403 WP316/316L. Sand iron Castings, Cast grey Iron, Ductile Iron Castings, Green Sand Casting, Sand Casting, Malleable iron castings, Grey Iron Casting, Grey Iron Castings, Spheroidal Graphite Cast Iron components, Grey Iron castings, Nodular Gray castings, Gray Iron castings, the material grades include Germany standard GG 25 Grey Iron Castings, GG 25 Gray Iron Castings, EN-GJL-250 Grey Iron Castings, FC25 Grey Iron Castings, FGG 25 Grey Iron Castings, SjG 25 Grey Iron Castings, EN-GJS-700-3 casting, FC 25 Grey Iron Castings, SISO 125 Grey Iron Castings, ANSI/ASTM A48 Class 35B Grey Iron Castings, UNS F12401 Grey Iron Casting, ASTM A48/A48M No.35A Grey Iron Casting, EN-JL-1040 Grey Iron Casting, Cu25, Cu24-44 Grey Iron Casting, FGL250 Grey Iron Castings, FC25 Class 4 (F12801) with JIS G 5501 Grey Iron Castings. The company mainly produces and supplies metal products and provides one-stop product supply from rough materials to semi-finished products to finished products. The products include green sand casting, investment casting, centrifugal casting tubes, precision casting, closed die forging, open die forging, seamless steel rolled rings, 430L stainless steel powder, 304L, 316L stainless steel powders, hardware accessories, pipeline elbow, Concentric Reducer, flange fittings and custom metal products, Non-ferrous metal machined components.

Send your quotation for Thermos Cups with Temperature Control Water Bottles. Seeking a product to keep drinks cold and impress customers. MOQ, CIF trade term, L/C or T/T payment, negotiable price.

Kindly send a quotation based on the following request from the importer: Product: Plastic Sheets Specifications: - Most Demanded Grades of Plastic: - HDPE Film Grade: Plastic bags, packaging film - High - HDPE Blow Molding Grade: Bottles, jerry cans, containers - High - HDPE Injection Molding Grade: Crates, chairs, household items - Medium - HDPE Pipe Grade (PE100/PE80): Water & gas pipes - High - PP Homopolymer (PP-H): Woven sacks, ropes, automotive parts - Medium - PP Random Copolymer (PP-R): Hot & cold water pipes - High - PP Block Copolymer (PP-B): Crates, chairs, industrial uses - High - PP Film Grade (BOPP): Food packaging films - Very High - PET Bottle Grade: Water bottles, soft drink bottles - Very High - PET Film Grade: Transparent packaging, films - High - PET Fiber Grade: Textiles, carpets, fabrics - Medium Quantity: 100 tons equally divided into above grades Trade Term: CIF Payment Term: LC Target Price: Negotiable Please provide pricing based on the above requirements. Thank you.

Please submit your quotation for molded fiber protective packaging to replace current cardboard inserts. Specifically designed for 5 L olive oil tins with dimensions 15.1 × 11.3 × 33 cm (H). Must include protective inserts around, top, and bottom, with a total thickness of 2 cm to fit logistic-friendly carton boxes. Base & lid ideally interchangeable. Intended for courier shipments, requiring strong protection without direct contact with water, cold, or heat. Requesting product details, reference photos, MOQ pricing, unit price, any tooling costs, and lead times for samples and production. Trade term: CIF; Payment term: LC / TT. Target price negotiable.

Kindly send a quotation based on the following request from the importer: 612 cartons of STC Twinings Cold Infuse Blueberry, Blackcurrant & Raspberry Flavoured Cold Water Infusion with Sweetener, product code 7773-0034, part of 277 packages. Destination port: Manila International Container Terminal, Philippines. Incoterms: CIF.

Kindly send a quotation based on the following request from the importer:

Please submit your quotation for the following product specifications: Marigold Extract Xanmax 0501 Powder (CWS) containing Lutein 5% and Zeaxanthin 1.0% Powder (Cold Water Soluble), quantity: 200 KGS, destination port: New York, United States.

Kindly send a quotation based on the following request from the importer: Ceramic glazed tiles for interior use, for flooring, made of stoneware ceramic, with water absorption coefficient not exceeding 0.5%. The products include Atakama 2.0 Light Grey (16800 m²), Cemento Light Grey Lappato Rect (28 m²), Quenos Grey (40 m²), Newstone Graphite (20 m²), Classic Oak Beige (0 m²), Passion Oak Cold Beige (68 m²), and Ginger Forest Beige Matt Rect (24 m²). The total quantity required is 900 square meters. The destination port is Novograd-Volynskyi customs post, port code UA101090, with FCA incoterms.

Please submit your quotation for the following product specifications: 1. Cold Water Tabletop Kitchen Faucet SS304, Marca: Stretto, Model: N/A, Reference: 20WT5603400, Serial: None, for domestic kitchen use, with a 1/4 turn ceramic disc valve, working pressure of 20-125 PSI, manual operation. Quantity: 1,048 pieces. 2. New Standard Monocontrol Basin Mixer, Marca: Stretto, Model: N/A, Reference: 20NS5003400, Serial: None, for domestic bathroom use, with a 1/4 turn ceramic disc valve, working pressure of 20-125 PSI, manual operation, 35mm single-lever. Quantity: 289 pieces. 3. Matte Black Under Dalles Monocontrol Basin Faucet, Marca: Plumber / PMB, Model: N/A, Reference: 20DL5003420, Serial: None, for domestic bathroom use, with a 1/4 turn ceramic disc valve, working pressure of 20-125 PSI. Quantity: 6,000 pieces. Payment term: Giro Directo Destination port: Buenaventura.