35 results for “Heat Transfer Systems Buying Leads, Buyers & Importers”

The buyer is seeking the best price offer for heat transfer sublimation paper with GSM ranging from 30 to 100, intended for a bulk purchase and long-term business tie-up.

The buyer is seeking 30gsm and 45gsm heat transfer sublimation paper suitable for the textile industry. They indicate potential for large market demand if competitive pricing is paired with quality product.

pls share best quote for 10000000 square meter heat transfer sublimation paper

The buyer is seeking the best quote for heat transfer sublimation paper with weights of 30 gsm and 45 gsm. The required quantity is 10,000,000 square meters per month.

We are looking for these products: 1) Required generator sizes (same manufacturer) Unit 1 (Single phase): 7 to 8 kilovolt-ampere rated output 230 volt, 50 hertz, single phase Silent canopy Unit 2 (Three phase): 15 to 20 kilovolt-ampere rated output (18 preferred) 400 volt, 50 hertz, three phase Silent canopy Both units must be supplied by the same factory and preferably the same platform family. 2) Full autonomous start requirement (non-negotiable) Both units must start and stop automatically with: Two-wire dry contact start input terminals for automatic transfer switching No key fob remote start as the primary method Designed for unattended standby operation 3) Controller input and output signals (non-negotiable) Controller must provide at minimum: Start input Running status output Alarm or fault output Fault log preferred 4) Standby cold-start logic (non-negotiable) Automatic glow plug and preheat control Reliable cold start without manual intervention 5) Power quality and step-load performance (non-negotiable) Stable voltage and frequency suitable for inverter and battery charger loads Must tolerate step-load without stalling or unstable speed hunting 6) Noise target (non-negotiable) 70 decibels or less at 7 metres at 50 percent load Must be silent canopy type 7) Fuel system requirement (non-negotiable) Fuel filtration including water separator Serviceable filterwhile in field use - Trade term: EXW (factory) first, later FOB. - Payment term: sample order by T/T 100%. Production: 30% deposit, 70% before shipment (negotiable for larger orders). - Quantity: 1–2 samples first, then 20–50 units per order, scaling to 100+ units. Destination port: Brisbane, Australia. - Trade terms are irrelevant if the offered products do not meet the required specifications. Petrol generators EFI is the required hard technical gate. Carburettor and choke systems are inherently unreliable after standby periods and are therefore not acceptable for unattended operation. This requirement is clearly stated in the petrol RFQ: EFI is mandatory, unless the manufacturer can provide documented, factory-proven evidence of a system designed and validated for reliable unattended starting. Diesel generators Proper glow plug and preheat logic is the required hardware and control requirement. “Electric start” alone is not sufficient if the controller does not execute temperature-based preheat, start retry logic, and fail-to-start alarms. These requirements are explicitly defined in the diesel RFQ and the acceptance protocol.

Send your quotation based on the importer’s request below: Heat Transfer Foil, 750g Orange, Quantity: 300 Kilograms, Destination Port: KPAF.

Kindly send a quotation based on the following request from the importer: Product Name: Heat Transfer Foil. Details: Orange color, 750g per unit. Quantity: 300 kilograms. Destination Port: KPAF.

Kindly send a quotation based on the following request from the importer: Product Name: Heat Transfer Foil, Description: Orange Label, Net Weight: 750g, Total Quantity: 56,000 pieces, Quantity Unit: Kilogram, Quantity: 60, Destination Port: KPAF.

Kindly send a quotation based on the following request from the importer: Heat transfer TOMATODO ENCANTO, quantity: 8,000 kilograms, destination port: GUAYAQUIL - AEREO.

Send your quotation based on the importer’s request below: Heat Transfer Foil (Labels) Tang 2.5kg Orange from Pakistan, 28,000 pieces, net weight approximately 42.8 kg, quantity 30,000 units, destination port KPAF.

Send your quotation based on the importer’s request below: The buyer is interested in Heat Transfer Foil (Labels) Tang 750G Orange from Pakistan. The required quantity is 300,000 kilograms, with a net weight of 224.8 kilograms. The destination port is KPAF. Please provide your best quotation accordingly.

Send your quotation based on the importer’s request below: Product: Heat Transfer Foil (Labels) Tang 2.5kg Orange (Pakistan) 2024. Quantity: 30,000 pieces. Destination port: KPAF. Net weight: 48.00 kg.

Kindly send a quotation based on the following request from the importer: Product Name: Heat Transfer Foil (Labels) Tang 750G Orange (Pakistan) 2024. Quantity: 300,000 kilograms. Destination Port: KPAF.

Kindly send a quotation based on the following request from the importer: Product Name: Heat Transfer Foil (Labels) Tang 2.5kg Orange (Pakistan) 2024. Quantity: 60,000 pieces. Destination Port: KPAF. Net Weight: 87.6 kg.

Send your quotation based on the importer's request below:

Please submit your quotation for the following product specifications: Spare parts-handle for plate heat press machine, made of iron, for use in the textile industry for transfer printing. Quantity: 10 pieces. Destination port: Maritime del Callao.

Send your quotation based on the importer’s request below: Two pieces of agricultural machinery parts, including a steel cover for machinery and a multifunctional handle, both made by HAMM and processed by molding. The cover is used for machinery, and the handle allows the connection of screws in advanced transmission systems. The destination port is Bogotá. Payment term is direct transfer.