22 results for “Electric Water Purifiers Buying Leads, Buyers & Importers”

The buyer is requesting a catalogue or price list for the Zonesun Zs-Dtdp4 4 Nozzles Automatic Electric Mineral Wine Water Milk Juice Edible Oils Condiments Perfume Essential Oil Liquid Filling Machine, indicating interest in starting a business relationship.

requirements: with power steering pump safety sensor: ELCB Waterproof standard: IP25 Target price (FOB): 25-35 USD

Type Electric / Gas / Diesel / Biomass Steam Generator (supplier’s recommendation acceptable) Steam Capacity 300–2000 kg/h (adjustable according to actual process) Rated Pressure 0.7–1.3 MPa Steam Quality Dryness ≥ 96% Feed Water Softened or purified water Thermal Efficiency ≥ 90% (electric), ≥ 88% (fuel-fired) Control System PLC automatic control with low-water, over-temperature, and over-pressure protection Installation Compact, factory-tested, ready for installation Dimensions Supplier to provide detailed drawings and space requirements Standards Compliance ASME / CE / GB / JIS or equivalent Operating Conditions Application: Food processing / Beverage bottling / Pharmaceutical cleaning and sterilization Operating Hours: 8–16 hours per day Power Supply: 380V / 50Hz (or as applicable) Ambient Temperature: 5–45 °C

We are looking for these products: 1) Required generator sizes (same manufacturer) Unit 1 (Single phase): 7 to 8 kilovolt-ampere rated output 230 volt, 50 hertz, single phase Silent canopy Unit 2 (Three phase): 15 to 20 kilovolt-ampere rated output (18 preferred) 400 volt, 50 hertz, three phase Silent canopy Both units must be supplied by the same factory and preferably the same platform family. 2) Full autonomous start requirement (non-negotiable) Both units must start and stop automatically with: Two-wire dry contact start input terminals for automatic transfer switching No key fob remote start as the primary method Designed for unattended standby operation 3) Controller input and output signals (non-negotiable) Controller must provide at minimum: Start input Running status output Alarm or fault output Fault log preferred 4) Standby cold-start logic (non-negotiable) Automatic glow plug and preheat control Reliable cold start without manual intervention 5) Power quality and step-load performance (non-negotiable) Stable voltage and frequency suitable for inverter and battery charger loads Must tolerate step-load without stalling or unstable speed hunting 6) Noise target (non-negotiable) 70 decibels or less at 7 metres at 50 percent load Must be silent canopy type 7) Fuel system requirement (non-negotiable) Fuel filtration including water separator Serviceable filterwhile in field use - Trade term: EXW (factory) first, later FOB. - Payment term: sample order by T/T 100%. Production: 30% deposit, 70% before shipment (negotiable for larger orders). - Quantity: 1–2 samples first, then 20–50 units per order, scaling to 100+ units. Destination port: Brisbane, Australia. - Trade terms are irrelevant if the offered products do not meet the required specifications. Petrol generators EFI is the required hard technical gate. Carburettor and choke systems are inherently unreliable after standby periods and are therefore not acceptable for unattended operation. This requirement is clearly stated in the petrol RFQ: EFI is mandatory, unless the manufacturer can provide documented, factory-proven evidence of a system designed and validated for reliable unattended starting. Diesel generators Proper glow plug and preheat logic is the required hardware and control requirement. “Electric start” alone is not sufficient if the controller does not execute temperature-based preheat, start retry logic, and fail-to-start alarms. These requirements are explicitly defined in the diesel RFQ and the acceptance protocol.

Our specifications： Fix carbon>70% Moisture content < 15% Volatile matter < 15% Ash < 3% 2-8 mesh

Type Electric / Gas / Diesel / Biomass Steam Generator (supplier’s recommendation acceptable) Steam Capacity 300–2000 kg/h (adjustable according to actual process) Rated Pressure 0.7–1.3 MPa Steam Quality Dryness ≥ 96% Feed Water Softened or purified water Thermal Efficiency ≥ 90% (electric), ≥ 88% (fuel-fired) Control System PLC automatic control with low-water, over-temperature, and over-pressure protection Installation Compact, factory-tested, ready for installation Dimensions Supplier to provide detailed drawings and space requirements Standards Compliance ASME / CE / GB / JIS or equivalent Operating Conditions Application: Food processing / Beverage bottling / Pharmaceutical cleaning and sterilization Operating Hours: 8–16 hours per day Power Supply: 380V / 50Hz (or as applicable) Ambient Temperature: 5–45 °C

The buyer is interested in the industrial RO water purifier (1000lph) water treatment machinery. They are requesting the best selling prices, information on delivery time, and details about payment terms.

Send your quotation based on the importer’s request below: Product: RO Water Purifier. Quantity: 2000 PCS. Destination Port: Los Angeles, California, United States.

Send your quotation based on the importer's request below: Product: Household electrical appliances including a plastic electric kettle with a power of 620W and a capacity of 0.5L (Art KO120130, quantity: 30 units), a spherical bowl multicooker with 750W power, 16 cooking programs, and a 4L capacity (Art RK740532, 18 units), a transparent electric kettle with 2200W power and 1.7L capacity with backlight (Art KI772D38, 144 units), a Delfini electric kettle with 2400W power and 1.5L capacity with anti-scale filter (Art KO150F30, 144 units), a loft kettle with 2400W power and 1.7L capacity made of plastic (Art KO250830, 36 units), a digital electric kettle with 1800W power and 1.7L capacity with display (Art KI831E10, 216 units), a double-layer kettle with 1500W power and 1.5L capacity with manual temperature adjustment in gray color (Art KO140BE0, 21 units), a Safe Tea electric kettle with 2150W power and 1.7L capacity, anti-scale filter, water level indicator, black color (Art KO260830, 108 units). Destination port: UA305130 - Uzhgorod cargo customs post, Incoterms: DAP. Please provide your best quotation for these products.

Please submit your quotation for the following product specifications: 4850 pieces of investment casting fishing reel, men's knitted crew socks, electric water valve pump parts, woven cap, silica carbide tiles, plastic parts for vacuum cleaner, fishing rods, fishing sinkers, gate valve, seasonal decoration, and Christmas decoration. Quantity: 700 cartons. Destination port: Long Beach, California, United States.